
To put the hooks in I measured an equal distance from the edges and spaced the holes evenly for the measuring spoons. Then I drilled holes and screwed in the hooks using needle nose pliers so my fingers wouldn't get sore. The screw ends for the hooks were a little longer than the wood was so they stuck out slightly, but no one will see that. For the measuring cups I laid them out after marking the edges and I spaced them so they wouldn't hit each other. I drilled those holes as well and screwed in the hooks.
To hang the hooks I first held them in place with the measuring cups on them to make sure they wouldn't get in the way of the door closing. Then I used a level to insure they were straight and I attached them using Gorilla Super Glue. Originally I had planned on screwing them into the cabinets, but I didn't have screws short enough for our thin doors.